First crystal structure of an NADP+-dependent l-arginine dehydrogenase belonging to the µ-crystallin family.

Crystal structures of Pseudomonas veroniil-arginine dehydrogenase (l-ArgDH), belonging to the µ-crystallin/ornithine cyclodeaminase family, were determined for the enzyme in complex with l-lysine and NADP+ and with l-arginine and NADPH. The main chain coordinates of the P. veroniil-ArgDH monomer showed notable similarity to those of Archaeoglobus fulgidusl-AlaDH, belonging to the same family, and pro-R specificity similar to l-AlaDH for hydride transfer to NADP+ was postulated. However, the residues recognizing the α-amino group of the substrates differed between the two enzymes. Based on a substrate modeling study, it was proposed that in A. fulgidusl-AlaDH, the amino group of l-alanine interacts via a water molecule (W510) with the side chains of Lys41 and Arg52. By contrast, the α-amino group of l-arginine formed hydrogen bonds with the side chains of Thr224 and Asn225 in P. veroniil-ArgDH. Moreover, the guanidino group of l-arginine was fixed into the active site via hydrogen bonds with the side chain of Asp54. Site-directed mutagenesis suggested that Asp54 plays an important role in maintaining high reactivity against the substrate and that Tyr58 and Lys71 play critical roles in enzyme catalysis.

Two different alanine dehydrogenases from Geobacillus kaustophilus: Their biochemical characteristics and differential expression in vegetative cells and spores.

Two putative alanine dehydrogenase (AlaDH) genes (GK2752 and GK3448) were found in the genome of a thermophilic spore-forming bacterium, Geobacillus kaustophilus. The amino acid sequences deduced from the two genes showed mutually high homology (71%), and the phylogenetic tree based on the amino acid sequences of the two putative AlaDHs and the homologous proteins showed that the two putative AlaDH genes (GK2752 and GK3448) belong to different groups. Both of the recombinant gene products exhibited high NAD+-dependent AlaDH activity and were purified to homogeneity and characterized in detail. Both enzymes showed high stability against low and high pHs and high temperatures (70 °C). Kinetic analyses showed that the activities of both enzymes proceeded according to the same sequentially ordered Bi-Ter mechanism. X-ray crystallographic analysis showed the two AlaDHs to have similar homohexameric structures. Notably, GK3448-AlaDH was detected in vegetative cells of G. kaustophilus but not spores, while GK2752-AlaDH was present only in the spores. This is the first report showing the presence of two AlaDHs separately expressed in vegetative cells and spores.

Self-assembly of Aeropyrum pernix bacilliform virus 1 (APBV1) major capsid protein and its application as building blocks for nanomaterials.

Virus capsid proteins have various applications in diverse fields such as biotechnology, electronics, and medicine. In this study, the major capsid protein of bacilliform clavavitus APBV1, which infects the hyperthermophilic archaeon Aeropyrum pernix, was successfully expressed in Escherichia coli. The gene product was expressed as a histidine-tagged protein in E. coli and purified to homogeneity using single-step nickel affinity chromatography. The purified recombinant protein self-assembled to form bacilliform virus-like particles at room temperature. The particles exhibited tolerance against high concentrations of organic solvents and protein denaturants. In addition, we succeeded in fabricating functional nanoparticles with amine functional groups on the surface of ORF6-81 nanoparticles. These robust protein nanoparticles can potentially be used as a scaffold in nanotechnological applications.

Conformational changes in the catalytic region are responsible for heat-induced activation of hyperthermophilic homoserine dehydrogenase.

When overexpressed as an immature enzyme in the mesophilic bacterium Escherichia coli, recombinant homoserine dehydrogenase from the hyperthermophilic archaeon Sulfurisphaera tokodaii (StHSD) was markedly activated by heat treatment. Both the apo- and holo-forms of the immature enzyme were successively crystallized, and the two structures were determined. Comparison among the structures of the immature enzyme and previously reported structures of mature enzymes revealed that a conformational change in a flexible part (residues 160-190) of the enzyme, which encloses substrates within the substrate-binding pocket, is smaller in the immature enzyme. The immature enzyme, but not the mature enzyme, formed a complex that included NADP+, despite its absence during crystallization. This indicates that the opening to the substrate-binding pocket in the immature enzyme is not sufficient for substrate-binding, efficient catalytic turnover or release of NADP+. Thus, specific conformational changes within the catalytic region appear to be responsible for heat-induced activation.

NADP+-dependent l-arginine dehydrogenase from Pseudomonas velonii: Purification, characterization and application to an l-arginine assay.

l-Arginine dehydrogenase (L-ArgDH) is an amino acid dehydrogenase which catalyzes the reversible oxidative deamination of l-arginine to the oxo analog in the presence of NAD(P)+. We here found the gene homolog of L-ArgDH in genome data of Pseudomonas veronii and succeeded in expression of P. veronii JCM11942 gene in E. coli. The gene product exhibited strong NADP+-dependent L-ArgDH activity. The enzyme was unstable, but markedly stabilized by the addition of 10% glycerol. The enzyme first purified to homogeneity consisted of a homodimeric protein with a molecular mass of about 65 kDa. The enzyme selectively catalyzed NADP+-dependent l-arginine oxidation with maximal activity at pH 9.5. The apparent Km values for l-arginine and NADP+ were 2.5 and 0.21 mM, respectively. The nucleotide sequence coding the enzyme gene was determined and the amino acid sequence was deduced from the nucleotide sequence. The simple colorimetric microassay for l-arginine using the enzyme was achieved.

Crystal structure of a novel type of ornithine δ-aminotransferase from the hyperthermophilic archaeon Pyrococcus horikoshii.

Ornithine δ-aminotransferase (Orn-AT) activity was detected for the enzyme annotated as a γ-aminobutyrate aminotransferase encoded by PH1423 gene from Pyrococcus horikoshii OT-3. Crystal structures of this novel archaeal ω-aminotransferase were determined for the enzyme in complex with pyridoxal 5'-phosphate (PLP), in complex with PLP and l-ornithine (l-Orn), and in complex with N-(5'-phosphopyridoxyl)-l-glutamate (PLP-l-Glu). Although the sequence identity was relatively low (28%), the main-chain coordinates of P. horikoshii Orn-AT monomer showed notable similarity to those of human Orn-AT. However, the residues recognizing the α-amino group of l-Orn differ between the two enzymes. In human Orn-AT, Tyr55 and Tyr85 recognize the α-amino group, whereas the side chains of Thr92* and Asp93*, which arise from a loop in the neighboring subunit, form hydrogen bonds with the α-amino group of the substrate in P. horikoshii enzyme. Site-directed mutagenesis suggested that Asp93* plays critical roles in maintaining high affinity for the substrate. This study provides new insight into the substrate binding of a novel type of Orn-AT. Moreover, the structure of the enzyme with the reaction-intermediate analogue PLP-l-Glu bound provides the first structural evidence for the "Glu switch" mechanism in the dual substrate specificity of Orn-AT.

Complete Genome Sequence of Bacillus cereus Strain HT18, Isolated from Forest Soil.

The genome sequence of Bacillus cereus strain HT18, isolated from forest soil, was 5,333,415 bp long. The genome included 5,825 putative coding sequences and 35.2% GC content; the strain had 5 plasmids. Average nucleotide identity based on BLAST+ (ANIb) and digital DNA-DNA hybridization (dDDH) results showed that HT18 was 98.78% and 90.70% homologous, respectively, to B. cereus ATCC 14579T.

Characterization of a Novel Thermostable Dye-Linked l-Lactate Dehydrogenase Complex and Its Application in Electrochemical Detection.

Flavoenzyme dye-linked l-lactate dehydrogenase (Dye-LDH) is primarily involved in energy generation through electron transfer and exhibits potential utility in electrochemical devices. In this study, a gene encoding a Dye-LDH homolog was identified in a hyperthermophilic archaeon, Sulfurisphaera tokodaii. This gene was part of an operon that consisted of four genes that were tandemly arranged in the Sf. tokodaii genome in the following order: stk_16540, stk_16550 (dye-ldh homolog), stk_16560, and stk_16570. This gene cluster was expressed in an archaeal host, Sulfolobus acidocaldarius, and the produced enzyme was purified to homogeneity and characterized. The purified recombinant enzyme exhibited Dye-LDH activity and consisted of two different subunits (products of stk_16540 (α) and stk_16550 (ß)), forming a heterohexameric structure (α3ß3) with a molecular mass of approximately 253 kDa. Dye-LDH also exhibited excellent stability, retaining full activity upon incubation at 70 °C for 10 min and up to 80% activity after 30 min at 50 °C and pH 6.5-8.0. A quasi-direct electron transfer (DET)-type Dye-LDH was successfully developed by modification of the recombinant enzyme with an artificial redox mediator, phenazine ethosulfate, through amine groups on the enzyme's surface. This study is the first report describing the development of a quasi-DET-type enzyme by using thermostable Dye-LDH.

Stereospecificity of hydride transfer and molecular docking in FMN-dependent NADH-indigo reductase of Bacillus smithii.

In this study, we investigated the stereospecificity of hydride transfer from NADH to flavin mononucleotide (FMN) in reactions catalyzed by the FMN-dependent NADH-indigo reductase expressed by thermophilic Bacillus smithii. We performed 1 H-NMR spectroscopy using deuterium-labeled NADH (4R-2 H-NADH) and molecular docking simulations to reveal that the pro-S hydrogen at the C4 position of the nicotinamide moiety in NADH was specifically transferred to the flavin-N5 atom of FNM. Altogether, our findings may aid in the improvement of the indigo dyeing (Aizome) process.

Characterization of a novel moderate-substrate specificity amino acid racemase from the hyperthermophilic archaeon Thermococcus litoralis.

The amino acid sequence of the OCC_10945 gene product from the hyperthermophilic archaeon Thermococcus litoralis DSM5473, originally annotated as γ-aminobutyrate aminotransferase, is highly similar to that of the uncharacterized pyridoxal 5'-phosphate (PLP)-dependent amino acid racemase from Pyrococcus horikoshii. The OCC_10945 enzyme was successfully overexpressed in Escherichia coli by coexpression with a chaperone protein. The purified enzyme demonstrated PLP-dependent amino acid racemase activity primarily toward Met and Leu. Although PLP contributed to enzyme stability, it only loosely bound to this enzyme. Enzyme activity was strongly inhibited by several metal ions, including Co2+ and Zn2+, and nonsubstrate amino acids such as l-Arg and l-Lys. These results suggest that the underlying PLP-binding and substrate recognition mechanisms in this enzyme are significantly different from those of the other archaeal and bacterial amino acid racemases. This is the first description of a novel PLP-dependent amino acid racemase with moderate substrate specificity in hyperthermophilic archaea.

Site-Directed Mutagenesis of Multicopper Oxidase from Hyperthermophilic Archaea for High-Voltage Biofuel Cells.

Enzymes from hyperthermophilic archaea are potential candidates for industrial use because of their superior pH, thermal, and long-term stability, and are expected to improve the long-term stability of biofuel cells (BFCs). However, the reported multicopper oxidase (MCO) from hyperthermophilic archaea has lower redox potential than MCOs from other organisms, which leads to a decrease in the cell voltage of BFCs. In this study, we attempted to positively shift the redox potential of the MCO from hyperthermophilic archaeon Pyrobaculum aerophilum (McoP). Mutations (M470L and M470F) were introduced into the axial ligand of the T1 copper atom of McoP, and the enzymatic chemistry and redox potentials were compared with that of the parent (M470). The redox potentials of M470L and M470F shifted positively by about 0.07 V compared with that of M470. In addition, the catalytic activity of the mutants towards 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) increased 1.2-1.3-fold. The thermal stability of the mutants and the electrocatalytic performance for O2 reduction of M470F was slightly reduced compared with that of M470. This research provides useful enzymes for application as biocathode catalysts for high-voltage BFCs.

Activity enhancement of multicopper oxidase from a hyperthermophile via directed evolution, and its application as the element of a high performance biocathode.

Although multicopper oxidase from the hyperthermophilic archaeon Pyrobaculum aerophilum (McoP) can be particularly useful in biotechnological applications, e.g., as a specific catalyst at the biocathode of biofuel cells (BFCs), owing to its high stability against extremely high temperatures and across a wide range of pH values, this application potential remains limited due to the enzyme's low catalytic activity. A directed evolution strategy was conducted to improve McoP catalytic activity, and the No. 571 mutant containing four amino acid substitutions was identified, with specific activity approximately 9-fold higher than that of the wild type enzyme. Among the substitutions, the single amino acid mutant F290I was essential in enhancing catalytic activity, with a specific activity approximately 12-fold higher than that of the wild type enzyme. F290I thermostability and pH stability were notably comparable with values obtained for the wild type. Crystal structure analysis suggested that the F290I mutant increased loop flexibility near the T1 Cu center, and affected electron transfer between the enzyme and substrate. Additionally, electric current density of the F290I mutant-immobilized electrode was 7-fold higher than that of the wild type-immobilized one. These results indicated that F290I mutant was a superior catalyst with potential in practical biotechnological applications.

Catalytic properties and crystal structure of UDP-galactose 4-epimerase-like l-threonine 3-dehydrogenase from Phytophthora infestans.

We report, for the first time, the three-dimensional structure and biochemical properties of a UDP-galactose 4-epimerase-like l-threonine 3-dehydrogenase (GalE-like L-ThrDH) from Phytophthora infestans, a plant disease-causing fungus. We identified GalE-like L-ThrDH using Kyoto Encyclopedia of Genes and Genomes (KEGG) database as a candidate target for the development of a new fungicide. The GalE-like L-ThrDH gene was expressed in Escherichia coli, and its product was purified and characterized. N-Acetylglycine was found to act as a competitive inhibitor of the enzyme (Ki =0.18 mM). The crystal structure of the unique hexameric GalE-like L-ThrDH was determined using the molecular replacement method at a resolution of 2.3 Å, in the presence of NAD+ and citrate, an analogue of the substrate. Based on the molecular docking simulation, N-acetylglycine molecule was modeled into the active site and the binding mode and inhibition mechanism of N-acetylglycine were elucidated.

Structural and biochemical characterization of an extremely thermostable FMN-dependent NADH-indigo reductase from Bacillus smithii.

The FMN-dependent NADH-indigo reductase gene from the thermophilic bacterium Bacillus smithii was overexpressed in Escherichia coli. The expressed enzyme functioned as a highly thermostable indigo reductase that retained complete activity even after incubation at 100 °C for 10 min. Furthermore, B. smithii indigo reductase exhibited high stability over a wider pH range and longer storage periods compared with indigo reductases previously identified from other sources. The enzyme catalyzed the reduction of various azo compounds and indigo carmine. The crystal structures of the wild-type enzyme in complex with FMN/N-cyclohexyl-2-aminoethanesulfonate (CHES) and the Y151F mutant enzyme in complex with FMN were determined by the molecular replacement method and refined at resolutions of 1.97 and 1.95 Å, respectively. Then, indigo carmine molecule was modeled into the active site using the molecular docking simulation and the binding mode of indigo carmine was elucidated. In addition, the structure of B. cohnii indigo reductase, which is relatively less stable than B. smithii indigo reductase, was constructed by homology modeling. The factor contributing to the considerably higher thermostability of B. smithii indigo reductase was analyzed by comparing its structure with that of B. cohnii indigo reductase, which revealed that intersubunit aromatic interactions (F105-F172' and F172-F105') may be responsible for the high thermostability of B. smithii indigo reductase. Notably, site-directed mutagenesis results showed that F105 plays a major role in the intersubunit aromatic interaction.

Characterization of dye-linked d-amino acid dehydrogenase from Sulfurisphaera tokodaii expressed using an archaeal recombinant protein expression system.

A gene encoding a dye-linked d-amino acid dehydrogenase (Dye-DADH) homologue was found in a hyperthermophilic archaeon, Sulfurisphaera tokodaii. The predicted amino acid sequence suggested that the gene product is a membrane-bound type enzyme. The gene was overexpressed in Escherichia coli, but the recombinant protein was exclusively produced as an inclusion body. In order to avoid production of the inclusion body, an expression system using the thermoacidophilic archaeon Sulfolobus acidocaldarius instead of E. coli as the host cell was constructed. The gene was successfully expressed in Sulfolobus acidocaldarius, and its product was purified to homogeneity and characterized. The purified enzyme catalyzed the dehydrogenation of various d-amino acids, with d-phenylalanine being the most preferred substrate. The enzyme retained its full activity after incubation at 90 °C for 30 min and after incubation at pH 4.0-11.0 for 30 min at 50 °C. This is the first report on membrane-bound Dye-DADH from thermophilic archaea that was successfully expressed in an archaeal host.

Unique active site formation in a novel galactose 1-phosphate uridylyltransferase from the hyperthermophilic archaeon Pyrobaculum aerophilum.

A gene encoding galactose 1-phosphate uridylyltransferase (GalT) was identified in the hyperthermophilic archaeon Pyrobaculum aerophilum. The gene was overexpressed in Escherichia coli, after which its product was purified and characterized. The expressed enzyme was highly thermostable and retained about 90% of its activity after incubation for 10 minutes at temperatures up to 90°C. Two different crystal structures of P. aerophilum GalT were determined: the substrate-free enzyme at 2.33 Å and the UDP-bound H140F mutant enzyme at 1.78 Å. The main-chain coordinates of the P. aerophilum GalT monomer were similar to those in the structures of the E. coli and human GalTs, as was the dimeric arrangement. However, there was a striking topological difference between P. aerophilum GalT and the other two enzymes. In the E. coli and human enzymes, the N-terminal chain extends from one subunit into the other and forms part of the substrate-binding pocket in the neighboring subunit. By contrast, the N-terminal chain in P. aerophilum GalT extends to the substrate-binding site in the same subunit. Amino acid sequence alignment showed that a shorter surface loop in the N-terminal region contributes to the unique topology of P. aerophilum GalT. Structural comparison of the substrate-free enzyme with UDP-bound H140F suggests that binding of the glucose moiety of the substrate, but not the UDP moiety, gives rise to a large structural change around the active site. This may in turn provide an appropriate environment for the enzyme reaction.

Construction of a novel bioanode for amino acid powered fuel cells through an artificial enzyme cascade pathway.

OBJECTIVE: The construction of a novel bioanode based on L-proline oxidation using a cascade reaction pathway comprised of thermostable dehydrogenases. RESULTS: A novel multi-enzymatic cascade pathway, containing four kinds of dehydrogenases from thermophiles (dye-linked L-proline dehydrogenase, nicotinamide adenine dinucleotide (NAD)-dependent Δ1-pyrroline-5-carboxylate dehydrogenase, NAD-dependent L-glutamate dehydrogenase and dye-linked NADH dehydrogenase), was designed for the generation of six-electrons from one molecule of L-proline. The current density of the four-dehydrogenase-immobilized electrode, with a voltage of + 450 mV (relative to that of Ag/AgCl), was 226.8 µA/cm2 in the presence of 10 mM L-proline and 0.5 mM ferrocene carboxylate at 50 °C. This value was 4.2-fold higher than that of a similar electrode containing a single dehydrogenase. In addition, about 54% of the initial current in the multi-enzyme cascade bioanode was maintained even after 15 days. CONCLUSIONS: Efficient deep oxidation of L-proline by multiple-enzyme cascade reactions was achieved in our designed electrode. The multi-enzyme cascade bioanode, which was built using thermophilic dehydrogenases, showed high durability at room temperature. The long-term stability of the bioanode indicates that it shows great potential for applications as a long-lived enzymatic fuel cell.

Effects of multicopper oxidase orientation in multiwalled carbon nanotube biocathodes on direct electron transfer.

In this study, multicopper oxidase (MCO) was immobilized on multiwalled carbon nanotubes (MWCNTs) at two different orientations, and the electrochemical properties of the resulting cathodes were investigated. Using N- or C-terminal His-tagged MCO and MWCNTs, we constructed two types of cathodes. We assumed that the distance between the type 1 (T1)Cu of the C-terminal His-tagged MCO and the MWCNT surface was lesser than that between the T1Cu of the N-terminal His-tagged MCO and the MWCNT surface. In addition, in the C-terminal His-tagged MCO, T1Cu was expected to be closer to the MWCNT surface than the type 2/type 3 Cu site. The current density of the modified electrode with a C-terminal His-tagged MCO immobilized on an MWCNT surface was 1.3-fold higher than that of the electrode with an N-terminal His-tagged MCO immobilized on an MWCNT surface. In addition, the amount of H2 O2 produced by the N-terminal His-tagged MCO immobilized MWCNT modified electrodes was 2.3-fold higher than that produced by the C-terminal His-tagged MCO immobilized MWCNT electrodes. In direct electron transfer (DET)-type biocathodes, both the MCO orientation and the distance between the T1Cu of MCO and the electrode surface are important. The authors succeeded in constructing highly efficient DET-type electrodes.

A novel bifunctional aspartate kinase-homoserine dehydrogenase from the hyperthermophilic bacterium, Thermotoga maritima.

The orientation of the three domains in the bifunctional aspartate kinase-homoserine dehydrogenase (AK-HseDH) homologue found in Thermotoga maritima totally differs from those observed in previously known AK-HseDHs; the domains line up in the order HseDH, AK, and regulatory domain. In the present study, the enzyme produced in Escherichia coli was characterized. The enzyme exhibited substantial activities of both AK and HseDH. L-Threonine inhibits AK activity in a cooperative manner, similar to that of Arabidopsis thaliana AK-HseDH. However, the concentration required to inhibit the activity was much lower (K0.5 = 37 µM) than that needed to inhibit the A. thaliana enzyme (K0.5 = 500 µM). In contrast to A. thaliana AK-HseDH, Hse oxidation of the T. maritima enzyme was almost impervious to inhibition by L-threonine. Amino acid sequence comparison indicates that the distinctive sequence of the regulatory domain in T. maritima AK-HseDH is likely responsible for the unique sensitivity to L-threonine. Abbreviations: AK: aspartate kinase; HseDH: homoserine dehydrogenase; AK-HseDH: bifunctional aspartate kinase-homoserine dehydrogenase; AsaDH: aspartate-ß-semialdehyde dehydrogenase; ACT: aspartate kinases (A), chorismate mutases (C), and prephenate dehydrogenases (TyrA, T).

Enzymological characteristics of a novel archaeal dye-linked D-lactate dehydrogenase showing loose binding of FAD.

A gene-encoding a dye-linked D-lactate dehydrogenase (Dye-DLDH) homolog was identified in the genome of the hyperthermophilic archaeon Thermoproteus tenax. The gene was expressed in Escherichia coli and the product was purified to homogeneity. The recombinant protein exhibited highly thermostable Dye-DLDH activity. To date, four types of Dye-DLDH have been identified in hyperthermophilic archaea (in Aeropyrum pernix, Sulfolobus tokodaii, Archaeoglobus fulgidus, and Candidatus Caldiarchaeum subterraneum). The amino acid sequence of T. tenax Dye-DLDH showed the highest similarity (45%) to A. pernix Dye-DLDH, but neither contained a known FAD-binding motif. Nonetheless, both homologs required FAD for enzymatic activity, suggesting that FAD binds loosely to the enzyme and is easily released unlike in other Dye-DLDHs. Our findings indicate that Dye-DLDHs from T. tenax and A. pernix are a novel type of Dye-DLDH characterized by loose binding of FAD.